A Custom Fit Grille will add a whole new look to the front of your ride. Allow approximately 6-8 weeks for processing. Oversize fees also waived on this item. Afterwards, the strut can be wiggled down and out of the truck. To learn more about cookies, view our.
Once these nuts are removed, you will need to use either a tie rod puller or pickle fork to unseat the tie rod from the spindle. All claims must be postmarked on or before 30 days from purchase. Step Two - Remove the sway bar end links Remove the end links by using a wrench to hold the nut on the top of the end link in place. Offer valid for retail customers in the United States and Canada. Offer limited to two 2 qualifying purchases per household or address.
Oversize fees also waived on this item. Applicable shipping fees will be charged, if required, on additional items added to the order. Truck freight and oversize charges still apply unless otherwise noted, and can only be shipped to the lower 48 States. Attach wheels and lower truck. Offer limited to two 2 qualifying purchases per household or address. Free Shipping Offers are for Standard Ground Delivery Service and are only valid for shipping addresses within the 48 contiguous United States.
If you are not using an air or electric powered impact wrench, loosen lug nuts with wheels on the ground. A Chevy Silverado lowering kit lets you drop the bed by several inches, making it easier to load and unload and taking the stress of climbing in and out off of your knees and back. Offer valid for retail customers in the United States and Canada. Be innovative with Silverado Custom Fit Grilles. Step Ten - Install rear axle flip kit Axle flip kits that allow larger drops require notching frame rails. Step Six - Install the drop spindles and strut assemblies Your new drop spindles will slide right into place onto the ball joints between the control arms. You'll see it on the item page as a Vendor Handling fee, and it will show up in the cart below the item s you're ordering.
All claims must be postmarked on or before 30 days from purchase. If you are not using an air or electric powered impact wrench, loosen lug nuts with wheels on the ground. The bottom bolt will require using a wrench to keep the nut from spinning in place. To remove the coil spring from the strut assembly, use a spring compression tool. Applicable shipping fees will be charged, if required, on additional items added to the order.
The rivets will need to be ground off of the hangers for removal. The rear axle can now be lifted into position, and the leaf spring can be tightened into place at the shackles and U-bolts. Valid on orders shipped in the contiguous United States. Remove the two bolts securing the bottom of the strut with a 15 mm socket. Keep truckin' with new Silverado Custom Fit Grilles. The adjustable spring shackles will mount in place of the originals.
Attach wheels and lower truck. Make it happen by installing a MaxTrac Complete Lowering Kit with a choice of mild to wild drops. People will see you coming with a new Custom Fit Grille. One nut has a clip over it attached to a wiring harness. Re-attach your sway bar end links to the sway bar and lower control arm. Drill new holes into the frame that correspond to the same size as the bolts you will be using to secure the notch plate to the frame. Not only will a lowered suspension generally give you a silky-smooth ride on-road, but it creates a sleek, pleasing stance.