Does anyone anywhere know what wires to tap into to make these lights work with the courtesy light. Valeo is a global company that engineers thermal, powertrain and other automotive systems with emission reduction and intuitive driving in mind. So step 1 went fine pull plug out of light bulb. All of my son's medical equipment has been leaked on several different times. The engine mates to a 5-speed manual transmission, which comes standard, or an optional 6-speed PowerShift automatic transmission. Ok, so I had a simple plan.
If it does not illuminate after turning on the ignition, if the symbol illuminate continuously during driving, it indicates a malfunction. Ford Focus ignition dashboard warning light Ignition warning light If the ignition warning light illuminates whilst driving, it is indicating a malfunction. The car is a musty mess. I have removed the courtesy light and there are 2 connections, 1 with 2 wires in it and the other with 1 wire. Release the fitting, press and turn the bulb holder to remove, and two small copper strips will appear on opposite edges of the hole, one being +12V, the other 0V. Vehicle is safe to drive. After activation there will be power to the footwell lights.
Diagnostics will specify the exact fault. Yes it plugs straight in to the grey socket mate. I have used lengths of led strip cut from a 5 metre roll and attached with contact adhesive. Now I have a defective car that I am sure the dealer knew about. So I know it's a defect from the manufacturer.
If not, it's simple enough to install yourself. It may be unlikely but as I've said they are easy to wire in yourself and run it to your courtesy light. Orange lights indicate less serious issues such as the vehicle needing a service. I figure, bah, maybe I blew the fuse and the driver side is fused separately from the rest? Shop for brand new fog lights for a safer journey! In that case you'd need to wire in the sockets and job done. Cheers in advance guys Stevie Tue 20 Oct 2009 20:45 06 1.
Well, it's new to me being it's a 2012. There was nothing wrong with it. These things are not mutually exclusive. Ford Focus oil pressure dashboard warning light Oil pressure warning light If the stays on after starting the vehicle or illuminates whilst driving, this indicates a malfunction. In which case, everything you need to know can be found in this guide: If you have a quick mooch at the second last post of this members thread, I uploaded photos of what the sockets look like and where they are on each side. Ford Focus engine warning light Engine warning light The engine warning light should extinguish when the engine is running.
I took it to the dealership left for 2 days they ran water tests and could not find where the water was coming from. Ford Focus red cog with red exclamation mark warning light Powertrain warning light The red cog with a red exclamation mark warning light signifies a fault with the powertrain. It links to a 5-speed manual transmission, which comes standard, or an optional 6-speed PowerShift automatic transmission. Flashing red warning lights indicate an urgent malfunction. When I started my car that morning and moved forward, water splashed onto my left foot from under the dash! The tyre pressure warning light will illuminate on the dashboard to inform the driver that air pressure has fallen to or below the 25% threshold limit. Is there something I am missing? Step 2 is where things don't make any friggin sense.
This isn't making any sense. The 2012 Ford Focus S rides on 15-inch steel wheels. Traction Control older models Traction control light During normal driving, the traction control dashboard light flashes after activation of the system. Have the system checked by properly trained technician. Now it happened again so I got on the web and found that it's happened to someone else. Has occurred almost every time it rains. Ford's AdvanceTrac electronic stability control system, antilock brakes and a tire pressure monitoring system are also included in the standard equipment package.
I've never had a new car before. Any ideas what the hell makes those little lights work with the doors? Periods of high acceleration, braking or when the clutch pedal s pressed does not illuminate the light. I want to fit footwell lights into my 2006 Focus 1. Ok, maybe it's wired up backwards, so I swap the wires the other way and. Ok, maybe it's the other wire to the hot. The type of bulb you need is a 501 w5w wedge bulb.
For power, the 4-door, front-wheel-drive Focus S gets a new 2. The interior was dry and the door was dry, so I'm not sure how the pool of water go there. You may find you already have the sockets but no wiring to them. Just an annoying water run discoloration to the doors. Reported to the dealer, he washed the car and got no repeat. You may find you have nothing at all and need to retrofit yourself.
I kinda had a feeling it was the sunroof. When I booked the appointment they said they hadn't heard of the issue before. Solved by taking a supply from the forward roof light without needing to identify wiring colours or break into the loom. If it flashes whilst driving, reduce speed immediately. I guess the next time it rains I will go sit at the dealership! Whilst the system is malfunctioning, it is deactivated. So if iv got the grey ones does the bulb simply just click in to them? Alright so I'm feeling good cuz its a Friday, but suddenly got ruined because I had dentist appointment. I feel like an idiot, but due to the tight space, I apparently nicked a wire and had a short that was making everything screwy.